AbegSun is a heating system of superlatives: low acquisition costs, no maintenance, no boiler room, no tank storage, no chimney and high energy efficiency thanks to one of the highest heating efficiencies in the world – proven with the test certificate of the TU Dresden according to DIN EN IEC 60675-3.
Attention - for no other heating system is there an efficiency test according to DIN on the useful energy in the room! JAZ, COP and SCOP of a heat pump have nothing to do with efficiency!
Heat pumps, district heating, gas and hydrogen heating systems should be completely ruled out for cost reasons and will never pay for themselves over the life cycle of an infrared heating system. Don't go into nonsensical debt for the rest of your life with an expensive heat pump!
Meet with AbegSun the right option for one of the best heating systems in the world. - Your wallet will be delighted!
Informiere Dich zum eigenen Nutzen bei Comparison of heating technologies →
• High efficiency with AbegSun von 69,5% (± 2,8%) von maximal 70%
• hohe vordere Strahlungstemperatur von über 145°C mit großer seitlicher Streuung
- Lowest possible heat loss from the rear thanks to up to 6 cm of mineral insulation
• extended beam angle of 147° for large-area heat distribution in the room
• Extremely short heat-up times of approx. 120 seconds to 100°C radiant temperature
• geringes Gewicht der Heizelemente, ca. 2-5 kg für leichte Handhabung
• 1-Klick-Magnet-Montagesystem für blitzschnelle und kostensparende Montage
• intelligent wireless thermostat controls for maximum energy savings
• Research and in-house production with modern laser manufacturing technology
• 10 years Guarantee (Terms and Conditions ⇒) on heatings, 2 years on electronics
Sensation 2024:
According to a study by the Fraunhofer Institute, an infrared heater is 32% more efficient than a gas condensing boiler - despite the low efficiency of only 50% of the infrared heaters used in the study.
AbegSun has the highest possible efficiency of almost 70%. It is one of the most economical heating systems in the world - both in terms of purchase and consumption.
Bad news: Mannheim, Stuttgart und Augsburg sind die ersten Städte, die 2035 das Gasnetz stillegen. Kassel ist noch in der Planung.
Every local authority is obliged to submit a heating plan for a future climate-neutral supply. This requires the decommissioning of energy supplies using fossil fuels.
Recommendation: you should prepare yourself in good time for gas price increases due to ever decreasing user numbers and the constantly rising CO² prices.
The size (output) of a radiator does not play a role in the consumption costs. A large radiator switches off sooner than a radiator with a lower output when the set temperature is reached, depending on its higher output. - The consumption is the same.
The only decisive factors for low heating costs with infrared heaters are:
the energy quality of the building - thermal insulation and airtightnessIf the efficiency is poor, consumption is always higher than necessary! Poor is 40%, excellent is 70%. This is the highest percentage that is physically possible. AbegSun has achieved 69.5% according to the DIN test certificate.
If you are in the radiation angle of an AbegSun radiator, you can feel a heat of 100°C after just 120 seconds (TU Dresden test certificate). This is only impaired if the airtightness of the room is poor.
The light/heat particles (photons) travelling at the speed of light gradually heat the room evenly. The radiant heat is partly absorbed and partly reflected. All areas of the room, ceilings, walls and floors, including the corners of a room, are covered. This is in contrast to convection heating, where areas are not heated at all (the corners of a room) and some are heated excessively (the ceilings of the room).
In order not to lose the advantages of dust-free, healthy indoor air through the use of infrared radiant heating, one must do not follow the excessive legislation in the new Building Energy Act (GEG). After the building has been made airtight with great effort (Blower Door Test), a forced ventilation prescribed. This negates the benefits of radiant heat and impairs the high air quality achieved in the room. For people who suffer from dust allergies, forced ventilation is harmful to their health.
the energy quality of the building - thermal insulation and airtightnessIf the efficiency is poor, consumption is always higher than necessary! Poor is 40%, excellent is 70%. This is the highest percentage that is physically possible. AbegSun has achieved 69.5% according to the DIN test certificate.forced ventilation causes convection in the room. This means heat losses, as moving air has a cooling effect of approx. 1.5 - 2°C. This must be compensated for by additional heat (turning up the thermostat).
Alle auf dieser Webseite genannten Preise sind (UVP) – unverbindliche Verkaufspreise einschließlich Mehrwertsteuer, Verpackung und Lieferung. Für Endpreise bitte ein Angebot einholen!
Our services include
Our normal terms and conditions apply generally, our general terms and conditions apply About your non-binding request for quotation oder über Telefon oder Mail kannst Du Deine aktuellen Preise erfragen. Wenn gewünscht, erstellen wir Dir bei Auftragserteilung eine free heating planning with installation plan, if you send us a floor plan (can be a mobile phone photo) by email - see Service →
Attention: with low consumption costs for years due to very high efficiency, acquisition costs are of secondary importance – see calculation table →
Heating system planning
- Free of charge per order
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Read More
to the infrared heater ⇒ 
