Die beste und günstigste Heizung der Welt ist ohne Zweifel die mit dem höchsten Wirkungsgrad, dem niedrigsten Verbrauch und den geringsten Anschaffungskosten.
AbegSun Infrarotheizungen haben einen der größten Wirkungsgrade nach DIN EN IEC 60675-3 info: KI** ⇒ – nachgewiesen mit dem Prüfzeugniss der TU Dresden.
Bei einem 1-2 Fam.-Hausbau ergeben sich Einsparungen von bis zu 20.000 € – ohne Kosten für Heizraum, Schornstein, Wartung und Emmisionsmessungen.
Achtung – für kein anderes Heizsystem gibt es eine Wirkungsgradmessung über die Nutzenergie im Raum! JAZ, COP und SCOP haben mit einem Wirkungsgrad nichts zu tun! Triff darum Deine richtige Entscheidung für das beste Heizsystem!
• Test certificate via the efficiency according to DIN from the TU Dresden
• High average radiation temperature of over 145°C with large lateral dispersion
• Up to 6 cm of insulation for the lowest possible rear heat loss
• extended beam angle of 147° for large-area heat distribution in the room
• Extremely short heat-up times of approx. 120 seconds to 100°C radiant temperature
• Low weight of the heating elements, approx. 2-4 kg for easy installation and handling
• Built-in radio thermostat control for maximum energy savings
• Laboratory research and in-house production with state-of-the-art laser manufacturing technology
• 10 years extended Garantie (AGB´s ⇒) on heating elements, 2 years on electronics
• Environmentally friendly, sustainable, resource-saving, recyclable, repairable
Sensation 2024: according to a study by the Fraunhofer Institute, infrared heating is 32% more efficient than gas condensing heating
AbegSun infrared heaters have the highest efficiency with the lowest energy costs (see annual electricity consumption →)
With the convection heaters we are familiar with the size of the radiators depends on the heat load or heat requirement calculation, - in the case of infrared radiant heating, on the calculation formulae of quantum physics, however:
The only decisive factors for determining the size and required heat output of an infrared heater are
If the efficiency of an infrared heater is poor, all hope is lost - consumption is always higher than necessary! Poor is 40%, excellent is 70%. AbegSun achieved 69.5% according to the DIN test certificate.
If the efficiency of an infrared heater is poor, all hope is lost - consumption is always higher than necessary! Poor is 40%, excellent is 70%. AbegSun achieved 69.5% according to the DIN test certificate.
With more power, however, you are on the safe side.
If you are in the radiation angle of a radiator, you will feel a heat of 100°C after just 120 seconds with AbegSun. This is only affected if the airtightness of the room is poor. The cold air flow then also draws into the area of the radiation angle and cools people there. We test such thermal bridges with the infrared camera at the request of our customers.
Instead of a larger or additional radiator, it is better to seal the windows and doors in this case.
| Room examples | Sizes - insulated/uninsulated | Heat output (watt) |
|---|---|---|
| Kitchen, bath, WC | >9 m² / 6 m² | 600 W |
| Children, Guest, Working | bis 12 m² / 9 m² | 900 W |
| Schlafen | up to 17 m² / 13 m² | 1120 W |
| Living | bis 24 m² / 20 m² | 2 x 900 W |
| Living + Dining | bis 28 m² / 24 m² | 1 x 900 + 1 x 1120 W |
| Living + Dining | bis 38 m² / 32 m² | 2 x 1120 W |
| Living + Eating + Working | up to 50 m² with room angle / 46 m² | 1 x 600 + 1 x 900 + 1 x 1120 W |
| Living + Eating + Working | up to 53 m² with room angle / 48 m² | 1 x 900 + 2 x 1120 W |
All prices stated on this website are (RRP) - non-binding sales prices including VAT. Please ask for a quote for final prices!
The offer includes
To get an offer, you can put together a request for a quote on this website. We are also happy to advise you by email or telephone. If desired, we will create a free heating planning with installation plan, if you send us a floor plan (can be a mobile phone photo) by email - see Service →
Please note: with low consumption costs due to a very high efficiency, acquisition costs are secondary –see calculation table ->
LEGAL MATTERS
Imprint
Privacy policy
AGB
REPEAL
Instruction
Explanation
INFORMATION
Efficiency
WEEE registry
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out at any time if you wish. Read more
